Filter
Top Products
28 en | Configuration Using HyperTerminal ATM/POS Bridge
F.01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc.
6.3.2 Communication Channels
Select the Communication Channel option to configure the four
physical communication port settings on the bridge.
Select the appropriate option to configure a specific COM port.
– Comport Mode: Select the appropriate communication
method between the bridge and the terminal:
– Asynchronous
– Mono synchronous
– Bisynchronous
– Bit Synchronous
– Communication Parameters: Select the appropriate
settings to match the communication parameters for the
terminal connected to this port:
– Baudrate
– Databits
–Parity
–Stopbits
–Flow Control