ATM/POS Bridge Configuration | en 23
Bosch Security Systems, Inc. Installation Manual F.01U.171.816 | 1.0 | 2010.09
5.2.4 COM Port
The COM Port page enables you to configure the four physical
communication port settings on the bridge.
– Comport Mode: Select the appropriate communication
method between the bridge and the terminal:
– Asynchronous
– Mono synchronous
–Bisynchronous
– Bit Synchronous
– Communication Parameters: Select the appropriate
settings to match the communication parameters for the
terminal connected to this port:
– Baudrate
– Databits
–Parity
–Stopbits
– Flow Control