Filter
Top Products
ATM/POS Bridge | en 41
Bosch Security Systems, Inc. Installation Manual F.01U.171.816 | 1.0 | 2010.09
Troubleshooting Bridge Firmware Update
Use the following steps to correct the firmware settings If you
receive the following error during the firmware update process:
1. Click OK to acknowledge the error.
2. Click the Cancel button to stop the process and to quite
the wizard.
3. Re-launch the downloadwizard.exe file to start the
update process.
4. Follow the process until you reach the communications
setup wizard screen. Use the following values for the
communication settings:
– Baud Rate: 19200
– Data: 8 bits
– Parity: None
– Stop: 1 bit
5. Continue through the wizard screens to start the upload
process.