Filter
Top Products
26 en | Configuration Using HyperTerminal ATM/POS Bridge
F.01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc.
6.3 Configuring Bridge Operation via
HyperTerminal
After you establish a HyperTerminal connection between a PC
and the bridge, use the menu structure to configure the bridge
settings. Press the F1 key to open the System Options menu,
then select 1 - Network Setup.
6.3.1 Network Setup
The Network Setup enables you to provide a label for the bridge
and to configure network settings.
CAUTION!
Changing a parameter on the Network Setup page may
interrupt the operation of the ATM/POS Bridge. Contact your
network administrator before making any changes.