Filter
Top Products
40 en | ATM/POS Bridge
F.01U.171.816 | 1.0 | 2010.09 Installation Manual Bosch Security Systems, Inc.
12. Click Finish to accept the settings and to start the
firmware update. If you receive an error message, refer to
Page 41.
13. Click Yes to overwrite the existing files on the bridge.
The wizard displays a download progress screen.
DO NOT interrupt the update process.
14. Click OK once the upload process is complete.
15. Disconnect the power cable and the console cable from
COM Port 3 on the bridge.
16. Reconnect a serial cable from a terminal to COM Port 3, if
required.
17. Reconnect the power cable to the bridge.
NOTICE!
Ensure that the console cable is disconnected from the bridge
before reconnecting the power.