FEED Key Self Test
See Figure 35.
1. Turn off the printer.
2. Press and hold the
FEED key while
turning on the power.
The FEED key self test
prints out at various
darkness settings above
and below that of the
darkness value shown on
the configuration label.
Look at these labels and
determine which one has
the best darkness setting
for your application. This
value can be entered into
the printer by setting the
darkness during the
configuration procedure.
Refer to page 46 for more
information.
The value printed on that label is added to (plus) or subtracted from (minus)
the darkness value specified on the configuration label. The resulting
numeric value (0 to 30) is the best darkness value for that specific
media/ribbon combination.
84 Brady X-PLUS Series User’s Guide
Figure 35