4
4.5 Loading Paper
4-8 CF2002/CF3102
Loading Paper Chapter 4
5
Load the paper into the drawer so
that the side of the paper to be
printed onto (the side facing up
when the package was un-
wrapped) faces up.
6
When making manual double-sid-
ed prints, load the paper so that
the second side (the blank side)
faces up.
✎
Note
If the paper is curled, flatten it before loading it.
Do not load so much paper that the top of the stack is higher than the Ä
mark.
Do not load more than 21 sheets of special paper.
Before loading envelopes, press them down to make sure that all air is
removed, and make sure that the folds of the flaps are firmly pressed,
otherwise the envelopes may become wrinkled or a paper misfeed may
occur.
When loading additional paper, remove any paper remaining in the drawer,
place it on top of the new paper, and then align the paper in the stack well
before loading it into the drawer. We recommend replenishing the paper
only after all of the paper in the drawer has been used, otherwise a paper
misfeed may occur.