Filter
Top Products
5
5.1 Message List
5-2 CF2002/CF3102
Printer Panel Messages Chapter 5
Low-power mode The printer has entered
Energy Saver mode.
• To cancel Energy Saver
mode, send a print job, or
open and close a cover.
• To change the time for the
printer to enter Energy Saver
mode, see
“To set the Engine
Setup Items” on page 3-13
.
Near trouble ## / ## Some malfunction occurred in
the printer.
Contact your technical
representative and inform them
of the error code. (See p. 5-46)
No staples The staples have run out. Replace the staple cartridge.
(See p. 5-8)
No xxxx toner
Call service
The toner for the indicated color
is empty.
Ask your technical representative
to replace the toner cartridge for
the indicated color.
No xxxx toner
Please change
The toner for the indicated color
is empty.
Replace the toner cartridge for
the indicated color. (See p. 5-4)
Paper jam at
Jx
A paper jam or staple jam
occurred at the indicated
location.
Remove the jammed paper or the
jammed staple. (See p. 5-16)
Punch dust full
Call service
The hole-punch waste container
is full.
Ask your technical representative
to empty it.
Punch dust full
Please change
The hole-punch waste container
is full.
Please empty it. (See p. 5-42)
Service Code
Cxxxx
An error occurred. Contact your technical
representative and inform them
of the error code. (See p. 5-44)
Sleep mode The printer has entered Sleep
mode.
• To cancel Sleep mode, send a
print job, or open and close a
cover.
• To change the time for the
printer to enter Sleep mode,
see
“To set the Engine Setup
Items” on page 3-13
.
The guides in tray # not set right The size of the paper loaded into
tray # is incorrect.
Load paper of an appropriate
size into tray #.
To print,
clear 1st tray
The upper paper output tray of
the finisher is full of paper.
Remove paper from the upper
paper output tray.
To print,
clear elevator tray
The lower paper output tray of
the finisher is full of paper.
Remove paper from the lower
paper output tray.
Waste toner full
Call service
The waste toner bottle is full. Ask your technical representative
to replace the waste toner bottle.
Waste toner full
Please change
The waste toner bottle is full. Replace the waste toner bottle.
Waste toner
nearly full
The waste toner bottle will soon
be full.
Replace the waste toner bottle as
soon as possible.
Waste toner bottle
not set
The waste toner bottle is not
installed.
Install the waste toner bottle.
Message Cause Action