Filter
Top Products
Setting Up the Machine
14
STEP 1
4 Plug the AC power cord into an AC power
outlet. Turn on the printer power switch.
5 After the printer has finished warming up, the
LCD shows Ready.
6 Press Go. The printer prints a test page. Check
that the test page has printed correctly.
Note
• If you press Reprint, the printer prints a test page
with duplex mode.
• This function will not be available after the first
print job you send from your computer.
6 Setting your language on the
control panel
1 Press the + or – button until the LCD shows
General Setup.
Press OK.
Select ab or OK
General Setup
2 Press OK again.
General Setup
Local Language
3 Press the + or – button to choose your
language. Press OK to accept.
Local Language
English