Filter
Top Products
Installing the Printer Driver
37
Macintosh
®
Macintosh
®
Wired
Network
6
For network interface cable users
Connecting the printer to your Macintosh
®
and
installing the driver
1 Connect the network interface cable to the
printer, and then connect it to a free port on
your hub.
2 Turn on the printer power switch.
3 Click Install Printer Driver on the menu
screen.
4 Click Network cable users and follow the
on-screen instructions. Then, restart your
Macintosh
®
.
For Mac OS
®
10.2.4 to 10.2.8 users:
Go to step 7.
For Mac OS
®
10.3 or greater users:
Go to step 5.
5 The Brother software will search for the Brother
printer. During this time the following screen
will appear.
Note
If more than one printer is available, the following
list appears. Choose the printer you wish to
connect, and then click OK.
• If there is more than one of the same printer
model connected on your network, the
Ethernet address (MAC address) will be
displayed after the model name.
6 When this screen appears, click OK.
For Mac OS
®
10.3 or greater users:
Setup is now complete.
7 When this screen appears, click Add.