Filter
Top Products
Installing the Printer Driver
25
Windows
®
Windows
®
Wireless
Network
Confirm your network environment
The setup process will be different depending on your network environment.
Installation using SecureEasySetup™.
If your wireless access point (A) supports SecureEasySetup™, you do not need to use a computer to configure the
printer. The access point (router) and your printer can automatically negotiate using the SecureEasySetup™ procedure.
For instructions, see Using the SecureEasySetup™ software to configure your printer for a wireless network on page 26.
A
Infrastructure mode
• Installation temporarily using a network cable.
If there is an Ethernet Hub or Router in the same network as the wireless access point of your printer, you can
temporarily connect the Hub or Router to the printer using an Ethernet cable (B), this is an easy way to configure the
printer. You can then remotely configure the printer from a computer on the network.
• Installation using a wireless computer.
If a computer of yours has wireless capability, you will need to change the wireless settings of the computer to Ad-hoc
mode so you can directly connect and configure the printer.
For instructions, see Configuration in Infrastructure mode on page 29.
B
Installation using the Setup Wizard from the control panel.
You can also configure the wireless settings of your printer, by using the Setup Wizard from the control panel.
For instructions, see Chapter 3 in the Network User’s Guide on the CD-ROM.