Filter
Top Products
Installing the Printer Driver
31
Windows
®
Windows
®
Wireless
Network
If you are using a wired computer, choose This
computer uses a network cable to connect
to the wireless network., you must configure
the wireless settings from the control panel.
Click Next and follow the on-screen
instructions to complete the setup. (See
chapter 3 in the Network User’s Guide on the
CD-ROM.) When finshed, go to Installing the
printer driver on page 33 to install the printer
driver.
8 Read the Important Notice. Check the box if
you confirm, and then click Next.
9 You need to temporarily change your
computer’s wireless settings. Follow the on-
screen instructions. Make sure you take notes
on all the settings such as SSID or channel of
your computer. You will need them to return
your computer back to its original wireless
settings, and then click Next.
10 To communicate with the un-configured
wireless printer, temporarily change the
wireless settings on your computer to match
printer’s default settings shown on this screen.
Check the box if you confirm, and then click
Next.
Note
• If a message to restart your computer appears
after the wireless settings have been changed,
restart your computer and then go back to step 1
and continue with the install skipping steps 10, 11
and 12.
• For Windows
®
XP SP2 users:
You can temporarily change the wireless settings
on your computer, following the steps below:
1 Click Start and then Control Panel.
2 Click Network and Internet Connections
icon.
3 Click Network Connections icon.
Item Record the current wireless
computer settings
Communication mode:
(Infrastructure / Ad
-hoc)
Channel: (1-14)
Network name:
(SSID / ESSID)
Authentication method:
(Open system / Shared
key)
Encryption:
(None / WEP / WPA /
WPA2
-PSK)
Encryption key: