Filter
Top Products
Installing the Printer Driver
46
STEP 2
Macintosh
®
Macintosh
®
Wireless
Network
8 Read the Important Notice. Check the box if
you confirm, and then click Next.
9 You need to temporarily change your
computer’s wireless settings. Follow the on-
screen instructions. Make sure you take notes
on all the settings such as SSID or channel of
your computer. You will need them to return
your computer back to its original wireless
settings, and then click Next.
10 To communicate with the un-configured
wireless printer, temporarily change the
wireless settings on your computer to match
printer’s default settings shown on this screen.
Check the box if you confirm, and then click
Next.
Note
You can temporarily change the wireless settings
on your computer, following the steps below:
1 Click the AirPort status icon and select.
Open Internet Connect....
2 Click the Network tab to see the available
wireless devices. You can see the Brother
wireless print server in the Network option.
Select SETUP.
Item Record the current wireless
computer settings
Communication mode:
(Infrastructure / Ad-hoc)
Channel: (1-14)
Network name:
(SSID / ESSID)
Authentication method:
(Open system / Shared
key)
Encryption:
(None / WEP / WPA /
WPA2-PSK)
Encryption key: