Filter
Top Products
Installing the Printer Driver
48
STEP 2
Macintosh
®
Macintosh
®
Wireless
Network
15 Click Next. The settings will be sent to your
printer. The settings will remain unchanged if
you click Cancel.
Note
• If you want to manually enter the IP address
settings of your printer, click Change IP Address
and enter the necessary IP address settings for
your network. After making your selection, click
Next and the Wizard will search for available
wireless networks.
• The control panel settings will be automatically
changed to WLAN when the wireless settings are
sent to your printer.
16 Follow the on-screen instructions.
For the users connected with a network
cable for configuration:
Disconnect the network cable between your
access point (hub or router) and the printer,
and click Next.
For the users connected without a
network cable for configuration:
Using the information you recorded in 9,
return the wireless settings of your
computer back to their original settings.
Check the box if you confirm, and then click
Next.
Installing the printer driver
Improper Setup
• DO NOT try to cancel any of the screens during
this installation.
• If your wireless settings fail, and error
message will appear during the installation of
printer driver and the installation will be
terminated. If you encounter this failure,
please go to step 1 and setup the wireless
connection again.
17 The driver installation starts.
For Mac OS
®
10.3 or greater users:
Go to step 18.
For Mac OS
®
10.2.4 to 10.2.8 users:
Go to step 20.
18 The Brother software will search for the Brother
printer. During this time the following screen
will appear.
Note
If more than one printer is available, the following
list appears. Choose the printer you wish to
connect, and then click OK.
• If there is more than one of the same printer
model connected on your network, the
Ethernet address (MAC address) will be
displayed after the model name.
19 When this screen appears, click OK.
For Mac OS
®
10.3 or greater users:
Setup is now complete.