Filter
Top Products
PhotoCapture Center
®
: Printing photos from a memory card or USB Flash memory drive
87
13
e Repeat step d until you have entered
the image numbers that you want to
print.
Note
• You can enter multiple numbers at one
time by using the l key for a comma or the
# key for a hyphen. For example, Enter 1,
l, 3, l, 6 to print images No.1, No.3 and
No.6. Enter 1, #, 5 to print images No.1 to
No.5.
• You can enter up to 12 characters
(including commas) for the image
numbers you want to print.
f After you have chosen the image
numbers, press OK again.
g Enter the number of copies you want
using the dial pad.
h Do one of the following:
Change the print settings. (See
page 92.)
If you do not want to change any
settings, press Color Start to print.
Photo Effects 13
You can edit and add effects to your photos
and view them on the LCD before printing.
Note
• After adding each effect, you can enlarge
the view of the image by pressing l. To go
back to the original size, press l again.
• The Photo Effects feature is supported by
technology from Reallusion, Inc.
Auto Correct 13
Auto Correct is available for most photos. The
machine decides the suitable effect for your
photo.
a Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b Press a or b to choose
Photo Effects.
Press OK.
c Press d or c to choose your photo.
Press OK.
d Press a or b to choose Auto Correct.
Press OK.
e Press a or b to increase or decrease the
number of copies.
f Do one of the following.
Press OK and change the print
settings. (See page 92.)
If you do not want to change any
settings, press Color Start to print.
Note
If Remove Red-Eye appears on the LCD,
press # to remove red-eye from your
photo.
Enhance Skin-Tone 13
Enhance Skin-Tone is best used for adjusting
portrait photographs. It detects human skin
color in your photos and adjusts the image.
a Make sure you have put a memory card
or USB Flash memory drive in the
proper slot.
Press (PhotoCapture).
b Press a or b to choose
Photo Effects.
Press OK.