Filter
Top Products
30
5
Entering Fax mode 5
When the machine is idle, the time appears
on the LCD. When you want to send a fax, or
change fax send or receive settings, press
the (Fax) key to illuminate it in green.
The LCD shows:
Press a or b to scroll through the Fax key
options. Some functions are only available
when sending black & white faxes.
Fax Resolution (See page 33.)
Contrast (See page 33.)
Speed Dial (See page 54.)
Outgoing Call (See page 55.)
Caller ID hist. (See page 55.)
Broadcasting (See page 32.)
Delayed Fax (See page 35.)
Batch TX (See page 35.)
Real Time TX (See page 34.)
Polled TX (See page 72.)
Polling RX (See page 71.)
Overseas Mode (See page 35.)
Scan Size (See page 31.)
Set New Default (See page 36.)
Factory Reset (See page 36.)
When the option you want is highlighted,
press OK.
Faxing from the ADF 5
a Press (Fax).
b Put the document face down in the ADF.
(See Using the ADF on page 9.)
c Enter the fax number using the dial pad,
Speed Dial or Search.
d Press Black Start or Color Start.
The machine starts scanning the
document.
Note
• To cancel, press Stop/Exit.
• If you send a black & white fax when the
memory is full it will be sent in real time.
Faxing from the scanner
glass 5
You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to letter or A4 size.
You cannot send multiple pages for color
faxes.
Note
Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
Sending a fax 5
09012345689
FAX
Fax Start
Press
Fax Resolution Standard
Contrast Auto
Speed Dial
Outgoing Call