Brother 7360N All in One Printer User Manual


 
Chapter 2
18
Type and size of paper 2
The machine loads paper from the installed
standard paper tray or manual feed slot.
The name for the paper trays in the
printer driver in this Guide are as
follows:
2
Paper capacity of the paper trays 2
1
Folio size is 8.5 in. 13 in. (215.9 mm x 330.2 mm)
2
Legal or Folio size paper is not available in some regions outside the USA and Canada.
Recommended paper specifications 2
The following paper specifications are suitable for this machine.
Use paper made for plain paper copying.
Use paper that is 20 to 24 lb (75 to 90 g/m
2
).
Use long grain paper with a neutral Ph value, and a moisture content of approx. 5%.
This machine can use recycled paper that meets DIN 19309 specifications.
Tray and optional unit Name
Standard paper tray Tray 1
Manual feed slot Manual
Paper size Paper types No. of sheets
Paper Tray
(Tray 1)
A4, Letter, B5,
Executive, A5, A5 (Long
Edge), A6, B6, Folio
12
,
Legal
2
Plain paper, Thin paper
and Recycled paper
up to 250
[20lb(80g/m
2
)]
Manual feed slot
(Manual)
Width: 3 to 8.5 in.
(76.2 to 216 mm)
Length: 4.6 to 16 in.
(116 to 406.4 mm)
Plain paper, Thin paper,
Thick paper,
Bond paper,
Recycled paper,
Envelopes and Labels
Single sheet
[20lb(80g/m
2
)]
Basis weight
20-24 lb (75-90 g/m
2
)
Thickness 80-110 m
Roughness Higher than 20 sec.
Stiffness
90-150 cm
3
/100
Grain direction Long grain
Volume resistivity
10e
9
-10e
11
ohm
Surface resistivity
10e
9
-10e
12
ohm-cm
Filler
CaCO
3
(Neutral)
Ash content Below 23 wt%
Brightness Higher than 80%
Opacity Higher than 85%