Filter
Top Products
Chapter 1
8
Status LED indications 1
The Status LED (light emitting diode) will flash and change colour depending on the machine’s
status.
LED Machine Status Description
Sleep Mode The power switch is off or the machine is in Sleep mode.
Green
(blinking)
Warming Up The machine is warming up for printing.
Green
Ready The machine is ready to print.
Yellow
(blinking)
Receiving Data The machine is either receiving data from the computer,
processing data in memory, or printing data.
Yellow
Data Remaining
in Memory
Print data remains in the machine memory.
Red
(blinking)
Service error Follow the steps below.
1. Turn off the power switch.
2. Wait a few seconds, and then turn it back on and try to print
again.
If you cannot clear the error and you see the same service call
indication after turning the machine back on, please call your
Brother dealer for service.