Filter
Top Products
61
B
B
Optional paper tray
(LT-5300)
B
An optional lower tray can be installed, and it
can hold up to 250 sheets of 80 g/m
2
paper.
When an optional tray is installed, the
machine can hold up to 550 sheets of plain
paper. If you want to buy an optional lower
tray unit, contact your Brother dealer.
For setup, see the instructions that we have
supplied with the lower tray unit.
Memory board B
DCP-8085DN has 64 MB of standard
memory and one slot for optional memory
expansion. You can expand the memory up
to 576 MB by installing small outline dual in-
line memory modules (SO-DIMMs). When
you add the optional memory, it increases the
performance for both copier and printer
operations.
In general, the SO-DIMMs with the following
specifications:
Type: 144 pin and 64 bit output
CAS latency: 2
Clock frequency: 100 MHz or more
Capacity: 64, 128, 256 or 512 MB
Height: 31.75 mm
Dram Type: SDRAM 2 Bank
For purchasing information and part numbers
visit the Buffalo Technology website:
http://www.buffalo-technology.com/
Note
• There might be some SO-DIMMs that will
not work with the machine.
• For more information, contact your
Brother dealer.
Options B