Filter
Top Products
Troubleshooting and routine maintenance
11 - 4
11
Unable to Init.
(Initialize)
Unable to Print
Unable to Scan
The machine has a mechanical
problem.
(For FAX-2920 and MFC-7225N)
Turn off the machine's power switch and then on
again. If the error message continues leave the
machine for several minutes and then try to print, copy
or scan again. (The machine can be turned off for up
to 4 days without losing faxes stored in the memory.)
(For FAX-2820)
When you turn off the machine's power switch its
memory will be cleared. To check whether the
machine has faxes in its memory, see Checking if the
machine has faxes in its memory on page 11-5. If there
are faxes you need to save them before following the
suggestions below (See Forwarding faxes to another
fax machine on page 11-5). Turn off the machine's
power switch and then on again. If the error message
continues, leave the machine for several minutes and
then try to print, copy or scan again.
Wrong Paper
Size
Paper is not the correct size. Load the correct size of paper (Letter or A4) and then
press Start.
ERROR MESSAGES
ERROR MESSAGE CAUSE ACTION