Filter
Top Products
2 - 1 GETTING STARTED
2
Initial Setup
Setting the Date and Time
When the machine is not in use it will display the date and time. If you
set up the Station ID the date and time displayed by your machine
will be printed on every fax you send. If there is a power failure, you
may have to reset the date and time. No other settings will be
affected.
1
Press
Menu/Set
,
0
,
2
.
2
Enter the last two digits of the year.
Press
Menu/Set
.
3
Enter two digits for the month.
Press
Menu/Set
.
(For example, enter 09 for September, or 10 for October.)
4
Enter two digits for the day.
Press
Menu/Set
. (For example, enter 06 for 6th.)
5
Enter the time in 24-Hour format.
Press
Menu/Set
. (For example, enter 15:25 for 3:25 P.M.)
6
Press
Stop/Exit
.
The LCD now shows the date and time whenever the machine
is in Fax mode.
Setting Tone and Pulse dialing mode
1
Press
Menu/Set
,
0
,
4
.
2
Press
▲
or
▼
to select
Pulse
(or
Tone
).
Press
Menu/Set
.
3
Press
Stop/Exit
.
Getting started
2.Date/Time
4.Tone/Pulse