Brother FAX-1940CN Fax Machine User Manual


 
REMOTE FAX OPTIONS 6 - 4
Turning off Remote Fax Options
If you set the Remote Fax Options to
Off
and there are faxes in your
machine’s memory, the LCD will give you two options.
If you press
1
, all unprinted faxes will be printed and erased
before the setting turns off. If a backup copy has already been
printed it will not be printed again.
If you press
2
, the memory will not be erased and the setting will
be unchanged.
(See
Printing a fax from the memory
on page 4-10.)
Before you can set up PC Fax Receive you must install the
MFL-Pro Suite software on your PC. Make sure your PC is
connected and turned on. (For details see Using Brother
PC-FAX software
on page 5-1 in Software User’s Guide on
the CD-ROM.)
If you select
Backup Print:On
, the machine will also print
the fax at your machine so you will have a copy if there is a
power failure before it is sent to the PC.
If you get an error message and the machine cannot print the
faxes in memory, you can use this setting to transfer your
faxes to your PC. (For details, see Error messages on page
12-1.)