Filter
Top Products
24
CHAPTER THREE
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about how
to proceed. The display you’ll probably see most often is shown below, showing
you, when you place a document in the feeder, that you can dial a number and
send a fax, or you can make a copy.
FAX: NO. & START
COPY: PRESS COPY
Function Selection Table
If you have a basic understanding of how to program your fax machine, you can
perform most of the programming settings without the Owner’s Manual. To help
you understand the function selections, options and settings that are found in
your fax programs, use the Function Selection Table below.
2. SETUP RECEIVE
Function Description Factory Set More Info
1. RING DELAY Number of rings before fax RING DELAY: 04 p. 34
machine answers in FAX or
FAX/TEL mode.
2. F/T RING TIME Sets the time for “double ring” in 20 pp. 34–35
FAX/TEL mode.
3. EASY RECEIVE Receive fax messages without ON p. 35
pressing the Start key.
1. INITIAL SETUP
Function Description Factory Set More Info
1. TONE/PULSE Selects dialing mode. TONE p. 27
2. DATE/TIME Enter date and time for LCD 01/01 1999 00:00 pp. 27–28
display and heading on
transmissions.
3. STATION ID Program name, fax number and — pp. 28–30
telephone number to appear on
each transmitted page.
4. BEEPER Adjust volume level of beeper. LOW p. 31
5. SLEEP MODE Conserves power 00 Min. p. 32
6. DELAYED TIMER Sets the time of day that — p. 32
delayed faxes will be sent.