Filter
Top Products
55
SETUP SEND
5
Press
Set
. The screen displays
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
6
Press
1
if you want to select additional settings. The display returns to
the SETUP SEND menu—OR—Press
2
to exit.
Contrast
If your document is very light or very dark, you might want to set the
contrast accordingly. Use S.LIGHT to send a very light document. Use
S.DARK to send a very dark document.
1
Insert the document, face down, in the feeder.
2
Press
Function
,
3
,
3
.
3
Press or to select AUTO, S.LIGHT or S.DARK.
4
When the screen displays your selection, press
Set
. The screen displays
ACCEPTED
OTHER SETTINGS?
1.YES 2.NO
5
Press
1
if you want to select additional settings. The display returns
to the SETUP SEND menu—OR—Press
2
if you are finished
choosing settings and go to Step 6.
6
Enter a fax number and press
Start
to send a fax.
Resolution
When you have a document in the feeder, you can use the
Resolution
key to
change the default setting. Press
Resolution
continuously until you see the
lights change to the setting you want. For Standard, turn Fine and S. Fine
lights off. For Photo, turn them both on.
Standard—Suitable for most typed documents.
Fine—Good for small print; transmits a little slower than standard resolution.
Super Fine—Good for small print or artwork; transmits slower than fine
resolution.
Photo—Use when document has varying shades of gray; slowest transmission
time.
See
Multiple
Resolution
Transmission
p. 60