Filter
Top Products
91
MESSAGE CENTER (FOR FAX 870MC AND MFC 970MC ONLY)
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote fax machine.
1
Dial your FAX/MFC number.
2
When you hear the beep, immediately enter your Remote Access Code
(
1
5
9
).
3
When you hear two short beeps, use the dial pad to press
9
5
4
.
4
Enter the new number of the remote fax machine where you want your fax
messages forwarded, and then press .
You cannot use and as dial numbers. However, if you want to store a
pause, press .
5
To retrieve the Memory Status List, when you hear two short beeps, use the
dial pad to press
9
6
1
.
6
Use the dial pad to enter the number of the remote fax machine (up to
20 digits), and then press .
7
After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints
the Memory Status List showing the new forwarding number.
8
Check the forwarding number.
If the forwarding number is incorrect, return to Step 1 to reset it.