Filter
Top Products
65
SETUP AUTO DIAL NUMBERS
3
Press
Set
. The screen displays your entry, then prompts you to enter the
number you’re storing.
#05:
ENTER & SET
4
Enter the number (up to 20 digits).
5
Press
Set
. The screen now prompts you to store a name with this number.
NAME:
6
Use the dial pad to enter the name (up to 15 characters). You can use the
chart on page 29 to help you enter letters—OR—Go to Step 7 to store
the number without a name.
7
Press
Set
.
8
The screen prompts you to select the type of number this is. Use or
to select the type you want.
FAX a fax number
TEL a telephone (voice) number
FAX/TEL both a fax and telephone number
CHAIN a number (usually an access code) for chain dialing
9
Press
Set
.
10
Return to Step 2 to store another Speed Dial number—OR—Press
Stop
to exit.
Changing One Touch and
Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a
number is already stored, the screen displays the current name stored there, then
prompts you to either
1. CHANGE—OR—2. EXIT.
1
Press
1
to change the number stored, or press
2
to exit without making a
change.
2
Enter a new number.
■
If you want to erase the whole number, press
Stop
when the cursor is to the
left of the digits. The letters above and to the right of the cursor are deleted.
■
If you want to change a digit, use or to position the cursor under
the digit you want to change, then type over it.
3
Follow the directions from Step 4 in Storing One Touch Numbers or
Step 5 in Storing Speed Dial Numbers.