Filter
Top Products
22
CHAPTER THREE
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between
the currently selected option, and a help message giving brief instructions
about how to proceed. The display you’ll probably see most often is shown
below, showing you, when you place a document in the feeder, that you can
dial a number and send a fax, or you can make a copy.
FAX: NO. & START
COPY: PRESS COPY
Function Selection Table
If you have a basic understanding of how to program your FAX/MFC, you
can perform most of the programming settings without the Owner’s Manual.
To help you understand the function selections, options, and settings that
are found in your fax programs, use the Function Selection Table below.
2. SETUP RECEIVE
Function Description Factory Set More Info
1. RING DELAY Number of rings before FAX/MFC RING DELAY: 04 pp. 35, 85
answers in FAX/TEL, FAX, or
MC (FAX 870MC and MFC TOLL SAVER: OFF
970MC only) modes. (FAX 870MC and
MFC 970MC only)
2. F/T RING TIME Sets the time for “double ring” in 20 p. 35
FAX/TEL mode.
3. EASY RECEIVE Receive fax messages without ON p. 36
pressing the Start key.
4. REMOTE CODE Enter code to activate or deactivate ON ( 51, #51) p. 40
machine from a remote location.
1. INITIAL SETUP
Function Description Factory Set More Info
1. TONE/PULSE Selects dialing mode. TONE p. 27
2. DATE/TIME Enter date and time for LCD 1999 1/1 00:00 pp. 27, 28
display and to print on
transmissions.
3. STATION ID Program name, fax number and — p. 28
telephone number to appear on
each transmitted page.
4. BEEPER Adjust volume level of beeper. LOW p. 30