Brother HL-2150N Network Card User Manual


 
Introduction
7
1
IPP 1
Internet Printing Protocol (IPP Version 1.0) allows you to print documents directly to any accessible printer
via the internet.
mDNS 1
mDNS allows the Brother print server to automatically configure itself to work in a Mac OS
®
X Simple Network
Configured system. (Mac OS
®
X 10.2.4 or greater).
TELNET 1
The Brother print server supports TELNET server for command line configuration.
SNMP 1
The Simple Network Management Protocol (SNMP) is used to manage network devices including computers,
printers and terminals in a TCP/IP network.
Web server (HTTP) 1
The Brother print server is equipped with a web server that allows you to monitor its status or change some
of its configuration settings.
Note
We recommend Microsoft Internet Explorer 6.0
®
(or greater) or Firefox
®
1.0 (or greater) for Windows
®
and
Safari™ 1.0 for Macintosh
®
. Please also make sure that JavaScript and Cookies are always enabled in
whichever browser you use. We recommend you upgrade to Safari™ 1.2 or greater to enable JavaScript.
If a different web browser is used, make sure it is compatible with HTTP 1.0 and HTTP 1.1.
LLTD 1
The Link Layer Topology Discovery protocol (LLTD) lets you locate the Brother machine easily on the
Windows Vista
®
Network Map. Your Brother machine will be shown with a distinctive icon and the node
name. The default setting for this protocol is Off.
LLMNR 1
The Link-Local Multicast Name Resolution protocol (LLMNR) resolves the names of neighboring computers,
if the network does not have a Domain Name System (DNS) server. The LLMNR Responder function works
in both the IPv4 or IPv6 environment when using a computer that has the LLMNR Sender function such as
Windows Vista
®
.
Web Services 1
The Web Services protocol enables Windows Vista
®
users to install the Brother printer driver by right clicking
the machine icon from the Start / Network selection. (See Installation when using Web Services (For
Windows Vista® users) on page 124). The Web Services also lets you check the current status of the
machine from your computer.