Brother HL-2150N Network Card User Manual


 
15
3
3
Overview 3
To connect your printer to your wireless network, you need to follow the steps in the Quick Setup Guide or
the Network User’s Guide. We recommend that you use the Brother installer application on the CD-ROM
which we have provided with the printer. By using this application, you can easily connect your printer to your
wireless network and install the network software and printer driver which you need to complete the
configuration of your printer for a wireless network. You will be guided by the on-screen instructions until you
are able to use your Brother wireless network printer.
If you want to configure your printer without using the Brother installer application, please read this chapter
for more details on how to configure the wireless network settings. For information on TCP/IP settings, see
Setting the IP address and subnet mask on page 10. For Wireless configuration using the one-push wireless
setting mode (For HL-2170W), see Chapter 6. For Wireless configuration using the PIN Method of Wi-Fi
Protected Setup™ (For HL-2170W), see Chapter 7.
Note
To achieve optimum results with normal everyday document printing, place the Brother printer as close to
the network access point (router) as possible with minimal obstructions. Large objects and walls between
the two devices as well as interference from other electronic devices can affect the data transfer speed of
your documents.
Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large
graphics, you may want to consider choosing wired Ethernet for a faster data transfer, or USB for the
fastest throughput speed.
Although Brother HL-2170W can be used in a both wired and wireless network, only one of the connection
methods can be used at a time.
Wireless network terms and concepts 3
When you configure the wireless network printer, you must ensure that your wireless network printer is
configured to match the settings of the existing wireless network. This section provides some of the main
terms and concepts of these settings, which may be helpful when you configure the wireless network printer.
SSID (Service Set Identifier) and channels 3
You need to configure the SSID and a channel to specify the wireless network you want to connect to.
SSID
Each wireless network has its own unique network name and it is technically referred to as SSID or ESSID
(Extended Service Set Identifier). The SSID is a 32-byte or less value and is assigned to the access point.
The wireless network devices you want to associate to the wireless network should match the access
point. The access point and wireless network devices regularly send wireless packets (referred to as a
beacon) which has the SSID information. When your wireless network device receives a beacon, you can
identify the wireless network that is close enough for the radio waves to reach your device.
Configuring the wireless network settings
(For HL-2170W)
3