Brother HL-2150N Network Card User Manual


 
47
5
5
Configuration in Infrastructure mode 5
Before configuring the wireless settings 5
IMPORTANT
If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation. You must know your wireless network settings before you proceed with
this installation.
If you have previously configured the wireless settings of the printer, you must reset the print server back
to the default factory settings (see Restoring the network settings to factory default on page 100).
If you are using Personal Firewall software, disable it. Once you are sure that you can print, restart your
Personal Firewall software.
You need to temporarily use an Ethernet cable during configuration.
Configure the wireless settings 5
a Turn on your Macintosh
®
.
b Put the supplied CD-ROM into your CD-ROM drive. Double-click the HL2100 icon on your desktop.
Double-click the Start Here icon. Choose your printer model and the language.
Wireless configuration for Macintosh
®
using the Brother installer application
(For HL-2170W)
5