Filter
Top Products
CHAPTER 4 CONTROL PANEL OPERATION
4-38
List of Factory Settings
The following table shows the initial factory default settings.
Notes
•
The settings are subject to the emulation mode. Effective modes are
indicated in parentheses in the following table.
•
The following settings cannot be restored to the factory settings with the
RESET menu in the FACTORY SETTINGS mode: INTERFACE MODE,
HRC SETTING, PAGE PROTECTION, SCALABLE FONT, LOCK PANEL,
PAGE COUNTER and local language for display messages.
•
The COPY setting is always restored to the factory setting when the printer
is turned off and on again.
•
It is not possible to reset the NETWORK settings using the control panel. If
you want to reset the print server to its default factory settings (resetting all
information such as the password and IP address information), hold down
the Network Test button on the Network board (NC-4100h) for more than 5
seconds.