Filter
Top Products
CHAPTER 4 CONTROL PANEL OPERATION
4-5
R
R
R
E
E
E
P
P
P
R
R
R
I
I
I
N
N
N
T
T
T
B
B
B
U
U
U
T
T
T
T
T
T
O
O
O
N
N
N
If you want to reprint a document that has just been printed, you can reprint
it by pressing Reprint. Also, if you have created a document that you wish
to share with colleagues, simply spool the document to a non-secure area
of the printer. This document can then be re-printed by anyone who is on
the network or at the printer control panel.
You can use the Reprint function when the printer is “READY” or in the
MENU state.
When you want to print PROOF, PUBLIC or SECURE data, we recommend
installing the optional HDD or CompactFlash card.
If you do not install an HDD or CompactFlash card, you can reprint from
RAM. (See “COMPACTFLASH CARD/ HARD DISK DRIVE” in Chapter 6.)
The reprint data in RAM will be deleted when the printer is turned off.
When you use RAM to reprint:
1.
Press Set on the control panel to exit from the READY state, and then
select RAMDISK SIZE in the SETUP mode.
2.
The default RAM is 0MB. Press + to increase the reprint RAM size in
increments of 1MB.
Notes
•
When you increase the RAM size for secure printing, the work area of the
printer is decreased and the printer performance is reduced. Ensure that
you reset the RAMDISK SIZE to 0MB when you have finished using
Secure Printing.
•
When you store data in RAM, the data will be deleted when the printer
power is turned off.
We also recommend adding additional RAM if you want to be able to print a
large quantity of secured data. (See “RAM Expansion” in Chapter 6)