Filter
Top Products
22
For Wireless Network Users
For Wireless Network Interface Users
6
Before you begin
First you must configure the wireless network settings of your printer to communicate with your network access
point/router. After the printer is configured to communicate with your access point/router computers on your
network will have access to the printer. To use the printer from these computers, you will need to install the printer
driver. The following steps will guide you through the configuration and installation process.
Infrastructure Mode
Note
• To achieve optimum results with normal everyday document printing, place the Brother printer as close to
the network access point/router as possible with minimal obstructions. Large objects and walls between the
two devices as well as interference from other electronic devices can affect the data transfer speed of your
documents.
• Due to these factors, wireless may not be the best method of connection for all types of documents and
applications. If you are printing large files, such as multi-page documents with mixed text and large
graphics, you may want to consider choosing wired Ethernet or parallel for a faster data transfer, or USB
for the fastest throughput speed.
• Although the Brother HL-5370DW can be used in a both wired and wireless network, only one of the
connection methods can be used at a time.
• The following instructions will offer two methods for installing your Brother printer in a wireless network
environment. Both methods are for infrastructure mode, using a wireless access point/router that uses
DHCP to assign IP Addresses. Choose your setup method from the next page and follow the instructions.
To set up your printer in any other wireless environment (e.g. Ad-hoc mode) you can find instructions in the
Network User’s Guide on the CD-ROM.
You can view the Network User’s Guide by following the instructions below.
1 Turn on your computer. Insert the Brother CD-ROM into your CD-ROM drive.
2 (Macintosh user only) Double-click the HL5300 icon on your desktop. Double-click the Start Here icon.
3 Choose your printer model and the language. The CD-ROM main menu will appear.
4 Click the Documentation, and then click HTML documents.
IMPORTANT
• If you are going to connect the printer to your network, we recommend that you contact your system
administrator prior to installation. You must know your wireless network settings before you
proceed with this installation.
• If you are using Windows
®
Firewall or a firewall function of anti-spyware or antivirus applications,
temporarily disable them. Once you are sure that you can print, configure the software settings
following the instructions again.
• If you have previously configured the wireless settings of the printer, you must reset the print server
back to its factory default settings (see page 43).
a Access Point
b Wireless Network machine (your printer)
c Wireless capable computer connected to the
access point
d Wired computer which is not wireless capable
connected to the access point with an Ethernet
cable
1
1
2
3
4