Filter
Top Products
34
MacintoshWireless Network
d Click Install Printer Driver on the menu
screen.
e Click Wireless Network users.
f Choose Wireless Setup and Driver Install
(Recommended), and then click Next.
g Choose Step by Step install
(Recommended) and then click Next.
h Choose With cable (Recommended) and
then click Next.
i Connect the Brother wireless device (your
printer) to your access point using a network
cable and click Next.
j Choose the printer you wish to configure, and
click Next. If the list is blank, check if the
access point and the printer are powered on,
and then click Refresh.
Note
• The default node name is “BRNxxxxxxxxxxxx”.
• You can find your printer’s MAC Address
(Ethernet Address) by printing out the Printer
Settings Page. See Print the Printer Settings
Page on page 43.