100
Routine maintenance B
Replacing the ink cartridges B
Your machine is equipped with an ink dot
counter. The ink dot counter automatically
monitors the level of ink in each of the 4
cartridges. When the machine detects an ink
cartridge is running out of ink, the machine
will tell you with a message on the LCD.
The LCD will tell you which ink cartridge is low
or needs replacing. Be sure to follow the LCD
prompts to replace the ink cartridges in the
correct order.
Even though the machine tells you to replace
an ink cartridge, there will be a small amount
of ink left in the ink cartridge. It is necessary
to keep some ink in the ink cartridge to
prevent air from drying out and damaging the
print head assembly.
CAUTION
Brother multifunction machines are
designed to work with ink of a particular
specification and will work to a level of
optimum performance and reliability when
used with genuine Brother Branded ink
cartridges. Brother cannot guarantee this
optimum performance and reliability if ink or
ink cartridges of other specifications are
used. Brother does not therefore
recommend the use of cartridges other than
genuine Brother Branded cartridges or the
refilling of cartridges with ink from other
sources. If damage is caused to the print
head or other parts of this machine as a
result of using other brands of ink or ink
cartridges, any repairs required as a result
may not be covered by the warranty.
a Open the ink cartridge cover.
If one or more ink cartridges have
reached the end of their life, for example
Black, the LCD shows Cannot Print
and Replace XX Ink.
b Press the lock release lever as shown to
release the ink cartridge indicated on
the LCD. Remove the cartridge from the
machine.
c Open the new ink cartridge bag for the
colour shown on the LCD, and then take
out the ink cartridge.