Brother MFC-5460CN All in One Printer User Manual


 
Loading documents and paper
13
2
Recommended media 2
To get the best print quality, we suggest using
Brother paper. (See table below.)
We recommend using ‘3M Transparency
Film’ when you print on transparencies.
1
Available in the USA and from November 2006 in
Canada.
Handling and using media 2
Store paper in its original packaging, and
keep it sealed. Keep the paper flat and
away from moisture, direct sunlight and
heat.
The coated side of photo paper is shiny.
Avoid touching the shiny (coated) side.
Load glossy paper with the shiny side
facing down.
Avoid touching either side of
transparencies because they absorb
water and perspiration easily, and this
may cause decreased output quality.
Transparencies designed for laser
printers/copiers may stain your next
document. Use only transparencies
recommended for inkjet printing.
Improper Setup
DO NOT use the following kinds of paper:
Damaged, curled, wrinkled, or
irregularly shaped paper
1 0.08 in. (2 mm) or longer
Extremely shiny or highly textured paper
Paper already printed on by a printer
Paper that cannot be arranged uniformly
when stacked
Paper made with a short grain
Paper capacity of the output paper
tray
2
Up to 50 sheets of 20 lb Letter or 80 g/m
2
A4
paper.
Transparencies or glossy paper must be
picked up from the output paper tray one
page at a time to avoid smudging.
Brother paper
Paper Type Item
Letter Plain (USA only) BP60PL
Letter Glossy Photo
BP61GLL
1
Letter Inkjet (Matte)
(USA only)
BP60ML
4 x 6 in. Glossy Photo
BP61GLP
1
1
1