Filter
Top Products
112
CHAPTER TWELVE
Retrieving the Memory Status List
You can retrieve the Memory Status List from a remote fax machine to
see if you have any fax messages.
1
Dial your MFC’s number.
2
When you hear the beep, immediately enter your Remote Access
Code (The factory setting is 1 5 9
).
3
When you hear two short beeps, use the dial pad to press 9 6 1.
4
Using the dial pad, enter the number (up to 20 digits) of the remote
fax machine where you want the Memory Status List forwarded, and
then press # #.
You cannot use and # as dial numbers. However, if you want to store a
pause, press #.
5
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. Your MFC then sends the
Memory Status List to the fax machine that you are calling from.
Retrieving Fax Messages
1
Dial your MFC’s number.
2
When you hear the beep, immediately enter your Remote Access
Code (The factory setting is 1 5 9
).
3
As soon as you hear two short beeps, use the dial pad to press 9 6 2.
4
Using the dial pad, enter the number (up to 20 digits) of the remote
fax machine where you want your fax messages forwarded, and then
press # #.
You cannot use and # as dial numbers. However, if you want to store a
pause, press #.
5
After you hear your MFC beep, hang up and wait.
Your MFC calls the remote fax machine. The fax machine that you
are calling from prints your fax messages.
Changing the Fax Forwarding Number
You can change the default setting of your fax forwarding number from a
remote fax machine.
1
Dial your MFC’s number.
2
When you hear the beep, immediately enter your Remote Access
Code (The factory setting is 1 5 9
).