Brother MFC-730 Fax Machine User Manual


 
158
CHAPTER EIGHTEEN
Quality
Select the print quality. The print quality and speed are related. Higher
quality takes a longer time to print.
Draft : 360 x 180 dpi. The fastest print mode (approximately two
to four times faster than normal mode) and gives lower ink
consumption. Use this mode to print large volume
documents or a document for proofing.
Normal : 360 x 360 dpi. Recommended mode for ordinary printouts.
Good print quality with comfortable printing speed.
Fine : 720 x 720 dpi for colour. Better print quality than normal
and faster print speed than Super Fine.
Super Fine : 1440 x 720 dpi. Use this mode to print precise images such
as photographs. Since the print data is much larger than
normal mode, processing time, data transfer time, and
printing time will be longer.
Media
Select the media to print on. The MFC changes the way it places dots
depending on the selected media type. To get good print output, make
sure to select the correct media type.
Selecting media type changes the print quality selection to the most
suitable one as listed below. We recommend that you print with the
preset quality for best printing result.
Paper Type Suitable print quality
Plain Paper Normal
Coated(360) Paper Normal
Coated(720) Paper Fine
Glossy Paper Super Fine
Transparency Normal
Transparency (mirror) Normal
Use only genuine Brother Coated Paper (Ink Jet), or Glossy Paper to get
the best print quality. Non-Brother special paper may not produce the
best quality.