Brother MFC-730 Fax Machine User Manual


 
61
SETUP SEND
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset ––OR–– press Speaker
Phone (for MFC-740).
1
Insert the document face down in the feeder.
2
Enter the fax number using One Touch, Speed Dial, Tel-index or the
dial pad.
3
Press Start. The MFC starts scanning the document and the display
indicates the job number and how much memony is available. Then
the MFC will start dialling if it is not sending, receiving or printing
the other documents.
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax
receiving tones before sending the fax.
1
Insert the document face down in the feeder.
2
Pick up the handset and listen for a dial tone ––OR–– press
Speaker Phone (for MFC-740).
3
Enter the fax number you want to call. (You can enter the digits
using the dial pad or you can enter a One Touch or Speed Dial
number or you can call from the Tel-index.)
4
When you hear the fax tone, press Start.
5
To hang up, replace the handset ––OR–– press Speaker Phone
(for MFC-740).
Note: Manual transmission does not use memory.
Fax Redial
If you’re sending a fax manually and the line is busy, you can retry the
number by pressing Redial/Pause.
If you’re sending a fax automatically and the line is busy, the MFC will
automatically redial up to 4 times at 2 minute intervals.
Dual Access
If the document feeder is empty, you can place a document in the feeder,
set temporary settings, dial a number, and begin scanning the fax into
memory, even when the MFC is receiving a fax, sending a fax, or
printing a fax from memory. The screen displays the new job number and
how much memory is available.
See
“One Touch
Dialling”
chap. 9
See
“Speed
Dialling”
chap. 9