Filter
Top Products
144
CHAPTER SIXTEEN
Installing the MFC-740 Maintenance Utility for
DOS
Before you install the program, make sure you have the following
hardware and software to install the program:
DOS Version 3.3 or later
Monitor EGA/VGA or compatible
Option Mouse; the mouse driver must be installed.
(You can also operate the program with the keyboard.)
Follow these steps to install the remote printer console program:
1
Make sure your machine is connected to your computer and it is set
to Online.
2
Start you computer and go to the DOS prompt. If you are in
Windows
®
, exit and return to the DOS prompt.
3
Insert the Brother CD-ROM into your CD-ROM drive (substitute
your appropriate drive letter for “X”).
4
At the DOS prompt (C:\>) type X: (X is the letter of your CD-ROM
drive) and press Enter.
c:\X:
5
Type CD DOS\INKJECT and press Enter.
X:\>CD DOS\INKJET
6
Type DOSETUP.EXE and press Enter.
X:\DOS\INKJET>DOSETUP.EXE
7
Follow the instructions from the installer.
Using the MFC-740 Maintenance Utility for
DOS
1
Select the directory you have chosen when you installed the program
by typing:
C:\>CD directory name