Filter
Top Products
OPTIONAL ACCESSORIES 13 - 1
13
Memory board
The memory board is installed on the main controller board inside the
MFC. When you add the optional memory board, it increases the
performance for both copier and printer operations.
Optional accessories
Optional Memory
32 MB TECHWORKS 12457-0001
64 MB TECHWORKS 12458-0001
128 MB TECHWORKS 12459-0001
In general, the DIMM must have the following specifications:
Type: 100 pin and 32 bit output
CAS Latency: 2 or 3
Clock Frequency: 100MHz or more
Capacity: 32, 64, 128 MB
Height: 1.4 inches (35 mm) or less
Parity: NONE
DRAM Type: SDRAM 4 Bank
Some DIMMs might not work with this MFC. For the latest
information from Brother visit:
http://solutions.brother.com