Filter
Top Products
SETUP RECEIVE 5 - 12
■
The MFC will only answer calls to its registered number.
■
The first two rings are silent on the MFC. This is because the fax
must «listen» to the ring pattern (to compare it to the pattern that
was ‘registered’). (Other telephones on the same line will ring.)
■
If you program the MFC properly, it will recognize the registered
ring pattern of the ‘fax number’ within 2 ring patterns and then
answer with a fax tone. When the ‘voice number’ is called, the
MFC will not answer.
Registering the Distinctive Ring pattern
Very important!
After you have set the Distinctive Ring feature to ON, the receive mode
is set to
Manual
automatically. Unless you have a TAD or Voice Mail
set up on the Distinctive Ring number,
Manual
mode means you must
answer all the calls yourself. You cannot change the receive mode to
any other mode while the Distinctive Ring is set to on.
1
Press
Menu
,
2
,
0
,
5
.
2
Press or to select
Set
.
Press
Set
.
3
Press or to select the stored ring pattern you want to
use.
Press
Set
.
(You will hear each pattern as you scroll through the four
patterns. Make sure you choose the pattern that the telephone
company gave you.)
4
Press
Stop/Exit
.
Distinctive Ring is now set to on.
Turning off the Distinctive Ring
1
Press
Menu
,
2
,
0
,
5
.
2
Press or to select
Off
.
Press
Set
.
3
Press
Stop/Exit
.
If you turn off Distinctive Ring, the MFC will stay in
Manual
receive mode. You will need to set the Receive Mode again.
(See To select or change your Receive Mode on page 5-2.)
Miscellaneous
5.Distinctive
Miscellaneous
5.Distinctive