Filter
Top Products
4 - 12 GETTING STARTED
Setting the LCD Contrast
You can change the contrast to help the LCD look lighter or darker.
1
Press
Menu
,
1
,
7
.
2
Press to increase the contrast.
—OR—
Press to decrease the contrast.
Press
Set
.
3
Press
Stop/Exit
.
Setting the Tray Use for Copy mode
If your MFC does not have the optional tray #2, you can skip this
setting. The default setting of
Auto
allows *
1
your MFC to choose the
paper from the optional Tray #2 when paper is out in Tray #1 or
*
2
when the size of the original document will fit best on the paper in
Tray #2.
1
Press
Menu
,
1
,
8
.
2
Press or to select
Tray#1
Only
,
Tray#2 Only
or
Auto
.
3
Press
Set
.
4
Press
Stop/Exit
.
■
*1 Copies will automatically be printed from Tray #2 only if
the Paper Size setting for Tray #2 is the same as Tray #1.
■
*2 Copies will automatically be printed from Tray #2 if the
Paper Size setting for Tray #2 is different than Tray #1 and
this paper size is more suitable for the scanned original
document.
General Setup
7.LCD Contrast
General Setup
8.Tray Use:Copy