Filter
Top Products
2 - 6 NC-2200W WIRELESS SETTING
NC9100h_FM6.0
Authentication and Encryption
Most Wireless networks use some kind of security settings. These
security settings define the authentication (how the device identifies
itself to the network) and encryption (how the data is encrypted as it
is sent on the network). If you do not correctly specify these options
when you are configuring your Brother wireless device, it will not be
able to connect to the Wireless network. Therefore care must be
taken when configuring these options. Please refer to the information
below to see which authentication and encryption methods your
Brother wireless device supports. For more information on Wireless
communication visit, http://solutions.brother.com/wireless
Authentication Methods
The Brother NC-2200w supports the following methods:
■ Open System
Wireless devices are allowed access to the network without any
authentication.
■ Shared Key (Infrastructure mode only)
A secret pre-determined key is shared by all devices that will
access the wireless network.
The NC-2200w uses following WEP key as pre-determined key.
Encryption Methods
Encryption is used to secure the data itself. The NC-2200w supports
WEP encryption.
■ None
No encryption method is used.
■ WEP
By using WEP (Wired Equivalent Privacy), the data is transmitted
and received with a secure key.