Filter
Top Products
NC-2200W WIRELESS SETTING 2 - 9
NC9100h_FM6.0
Changing your Computer’s Wireless Settings
Before you can use the Brother Printer/MFC/DCP in a wireless
network, the NC-2200w must be configured to match your network
configuration.
To configure the NC-2200w from a wireless computer on your
network, you must temporarily change your current wireless settings.
Before changing the current wireless settings of your computer, we
recommend you make a note of your current wireless network
settings. You will need to return to these settings at the end of
configuring the print/scan server.
To communicate with the un-configured NC-2200w change your
wireless computer settings to:
Communication mode:Ad-hoc (channel 11)
Network name (SSID/ESSID):SETUP (case sensitive)
Encryption:None
Windows
®
98/Me/2000 Users
Please refer to your wireless card manufacturer instructions for
changing the wireless settings. And then go to Step 3 Configuring the
Print Server.
If you are using Windows
®
XP or Mac OS
®
X 10.2.4 and you are using its built
in Wireless Ethernet capabilities, use the following steps for each Operating
System.
We recommend you to contact your network administrator if
you need assistance with your computers wireless settings.
Before installation, if you are using Personal Firewall
software (e.g. the Internet Connection Firewall available in
Windows XP), disable it. Once you are sure that you can
print, re-start your Personal Firewall software.