Filter
Top Products
5 - 5 NETWORK SCANNING FROM WINDOWS
®
NC9100h_FM6.0
STEP 2 :Specifying the Scan Destination Address using
the NC-2200W Home Page
You must use a web browser to configure this setting.
1
Open your Web browser and enter the following in the URL field.
http://NC-2200w_ip_address
2
Go to the General Page under the Configurations.
3
Enter the IP address or name of the target computer.
■ Where NC-2200w_ip_address is the IP address or node name
of your NC-2200w.
■ For more information on the IP address and the login password
etc., see
Using the Embedded Web Server to change
settings
on page 2-20.
If the IP address was assigned automatically, you should
enter the computer name because the IP address may have
changed. This name can be Windows
®
(NetBIOS) computer
name or a DNS host name.
(Available languages are English, German,
French, Dutch and Japanese.)