Brother PE-DESIGN 7 Electronic Accessory User Manual


 
11
Introduction
Optional Supplies
Note:
• The only original cards that can be used with this USB card writer module are those like the one
enclosed or optional original cards of the same type.
Memo:
• Additional blank original cards can be purchased through an authorized dealer.
Principal Parts
Memo:
• Since power is supplied to the USB card writer module through the USB connection to the compu-
ter, there is no power supply cable or power switch.
• Be sure to keep original cards away from high humidity, direct sunlight, static electricity and strong
shocks. Furthermore, do not bend the cards.
Original card
LED indicator
This indicator lights up when the unit is turned on,
and fl ashes when the USB card writer module is
communicating with the computer.
Note:
Never remove an original card or unplug the
USB cable while this indicator is fl ashing.
USB connector
Connect to the computer.
Card slot
Insert an original card/embroidery
card here.
PED7_QSG.indb Sec1:11PED7_QSG.indb Sec1:11 02.06.2006 20:07:0002.06.2006 20:07:00