Filter
Top Products
Configuring your machine for a wireless network (Not available for MFC-5490CN and MFC-5890CN)
21
3
Step by step chart for wireless network configuration 3
For Infrastructure mode 3
a Confirm your network environment. (See page 23.)
b Confirm your wireless network setup method. (See page 24.)
c Configure your machine for a wireless network. (See page 27.)
Wireless configuration and installing drivers and software have been completed.
Infrastructure mode
Connected to a computer with an access point
or
Ad-hoc mode See page 22.
Connected to a wireless capable computer
without an access point
Using the Setup
Wizard from the
control panel
(Recommended)
Using the
SES/WPS/AOSS
control panel
menu
Using the PIN
Method of Wi-Fi
Protected
Setup™
Using the Brother
installer
application
Temporarily using
a network cable
Using the
SES/WPS/AOSS
control panel
menu
See page 27. See page 31. See page 35.
For Windows
®
(See page 38.)
For Macintosh
®
(See page 58.)
For Windows
®
(See page 45.)
For Macintosh
®
(See page 65.)
Installing drivers and software (See the Quick Setup Guide.)