Filter
Top Products
53 Configuring AirStation Settings
WLA-AWCG User Manual
5.2.8 Configuring channel settings
If numerous AirStation Pro’s are being used to communicate with a Wireless LAN
PC on the same floor, the baud rate may be reduced, this is because the AirStation
Pro’s are using the same frequency which can create bandwidth congestion.
Communication can be dramatically improved by setting a different DS channel for
each AirStation Pro.
To configure the channel settings, follow these steps:
1 Open the Basic Settings screen. For instructions on how to do this, see
“Displaying the Settings screen” on page 43
.
2 In the DS channel drop-down list, select a different channel.
Note: It is preferable to set each AirStation Pro approximately 4 channels apart.
3
Click Set.
A page is displayed, confirming your settings are complete.
5.2.9 Setting up routing
To configure routing, follow these steps:
1
Open the Basic Settings screen. For instructions on how to do this, see
“Displaying the Settings screen” on page 43.
2 Click Routing on the Advanced Settings menu in the left panel.