Filter
Top Products
65 Troubleshooting
WLA-AWCG User Manual
6.2.3 Network adapter fails at driver installation.
Cause 1:
Drivers are not installed correctly.
Solutions:
To correct this error, re-install the drivers for the network adapter. Refer to your
Windows documentation for information on how to do this.
If you have tried all of the above with no success, then it may be that the network
card is not functioning correctly. You must then check your network card. Refer to
the Appendix for instructions on how to do this.
Cause 2:
The network adapter is not installed correctly.
Solutions:
To correct this:
1
Ensure that the network adapter is installed in the computer.
For instructions on how to do this, refer to
AirStation Pro Installation,
“Network adapter installation” on page 29.
2
If the network adapter still cannot be found, remove the adapter and then re-
install it.
Refer to your Windows documentation for instructions on how to do this.
6.2.4 AirStation IP address is not assigned
If you are unable to assign the IP address it could be due to the following reason:
Cause 1:
An invalid password has been entered.
Solutions:
To correct this, ensure that the password entered corresponds to the password set
for the AirStation Pro.